Search This Blog

Final Suspension parts

12th October 2010
With this month full of planning for my daughters birthday there was not a lot of time spare to work on my Buggy, this was compounded as it was the traditional bonfire season in the UK. The reality of this was that there was very little that I could do.

I did however locate and purchase some front suspension arms. These were obviously mucky and in much need of restoration. I would have to renew all the ball joints. Which meant I had to get the old ball joints out. I had spent some time on the Internet researching different methods for removing the ball joints but had found none that I felt competent with, that would not damage the arms.

I started the clean up operation by scrapping the mud and soil debris from the arms. I then used Gunk to clean the grease and dirt from the arms.

1 comment:

  1. Yes, that's quite the job you have done. The ball joints play critical role in steering and suspensions.

    ReplyDelete